Ergonomics case study

Their workers had to work on desks with mouse away from the keyboard so they had to lean to get the mouse. Employee personal accountability was addressed by implementing a "Safety First" mentality that stressed ergonomics as a key issue in personal safety and not a separate stand-alone topic.

Ergonomics Improvement Project Case Study

Workers using typewriters had to turn to the left to read the documents they were typing. Fortunately for Tricia, she could refer to a similar project successfully undertaken by the Design and Construction function of The Dow Chemical Company, which is discussed in the case study below.

Ergonomics Case Study — Press Operator Job

Read more about this ergonomic case study here: Lowering boxed panelboards to pallets located on floor, and Carrying panelboard boxes from the packout line to the pallets. References 1 March U.

Ergonomics Case Study - Case Studies in Ergonomics

Workers needed to work while being on their knees and bent over assembling machinery parts. OSHA reported increasing cases of upper limb disorders during the period between and In the employee survey, several employees identified high levels of MSD risk at this operation.

Awkward postures place excessive force on joints and overload the muscles and tendons around the effected joint. This tool allows you to keep all ergonomic assessment data in one place. Task Prior to Abatement Description Employees had to replace the chute [ Stow bins installed in passenger compartments of large commercial aircrafts are heavy and bulky [ Task Prior to Abatement Description Various Ergonomics case study material handling tasks performed by workers.

In this case, the multi-disciplinary ergonomics team held a brainstorming session to develop solution ideas. Task Prior to Abatement Description Workers had to perform regular office work using computers [ These tasks were verified as hazardous by OSHA first-aid logs and forms.

Each step in the sequence has a similar control, ensuring that the improved process is followed long after the conclusion of the project.

Read more about this ergonomics case study and more Ergonomic Case Studies, please go to " http: Ergonomic Risk Factors An ergonomic assessment confirmed high levels of MSD risk for the lower back due to highly repetitive side bending, and also significant shoulder and elbow risk due to reaching requirements.

Ergonomic Opportunity Identified Assessing the Data: They next identified a series of key variables affecting the process outcome that included: The worker wears gloves and stands facing the assem [ At each facility, the company also designated Ergonomic Focal Points and Ergonomic Contacts, DDC workers who volunteered to receive specialized training and be available as a first point of contact for ergonomic concerns and questions.

As improvements like these have been repeated throughout the Company, the severity of ergonomics injuries has declined. Several employees had to visit chiropractors. They redesigned the workstations at assembling plants to workers did not have to bend or kneel.


The incidence rate of carpal tunnel syndrome was increasing. Out of nine operators rating the level of exertion of this job, five rated the exertion level at nine or ten on a scale.Mar 02,  · The goal of ergonomics (i.e.

the scientific study of people at work) is to prevent soft tissue injuries and musculoskeletal disorders (MSDs) caused by sudden or sustained exposure to force, vibration, repetitive motion, and awkward posture.

Ergonomics- Metal Tube Cutting 10th March Task Prior to Abatement (Description) Get tubes: The worker lifts metal tubes that are 24 feet long and weigh 50 to pounds. Page 2 of 3 Ergonomic Case Study: TMX Aerospace Raised Workstations Recommendations. The L&I ergonomist proposed solutions that would elevate the work to a comfortable height for.

Ergonomics Case Study: The Dow Chemical Company's Use of the "Six Sigma" Methodology. OSHA, (May 15, ).

Case Studies

OSHA, (May 15, ). Describes the Six Sigma methodology and how Dow used it to successfully address ergonomics hazards in the company's design and construction division. The ergonomics case study goes on to report that it reduced their upper limb disorder cases by 41 percent and all related injuries by 70 percent.

This ergonomics program was made successful by the support and funding of the upper management for it. 3 This case study was developed from information provided by Karen Kearns, Industrial Hygiene Specialist, and Mark Spence, Manager, North American Health and Safety Regulatory Affairs, The Dow Chemical Company.

Ergonomics case study
Rated 5/5 based on 37 review